Dalian Zhenghe Pump Industry Co., Ltd
contacts:Eyan
mobile phone:+8613942611612
Landline:0411一84245612
email:395904452@qq.com
URL:www.dlzhby.com
address:No. 17 Yutan Street, Ganjingzi District, Dalian City, China
Corrosion has always been one of the most troublesome hazards for chemical equipment in Dalian. A slight mistake can cause damage to the equipment, and in severe cases, it can lead to accidents or even disasters. According to relevant statistics, about 60% of the damage to chemical equipment is caused by corrosion. Therefore, when selecting multi-stage chemical pumps, attention should be paid to the scientific selection of materials. There is usually a misconception that stainless steel is a "universal material" that can be used in any medium or environmental conditions, which is very dangerous. Dalian Chemical Pump Accessories Manufacturer Editor: Below are some key points for selecting materials for commonly used chemical media:
1. As one of the strong corrosive media, sulfuric acid is an important industrial raw material with a wide range of applications. The corrosion of materials varies greatly with different concentrations and temperatures of sulfuric acid. For concentrated sulfuric acid with a concentration above 80% and a temperature below 80 ℃, carbon steel and cast iron have good corrosion resistance, but they are not suitable for high-speed flowing sulfuric acid and are not suitable as materials for pumps and valves; Ordinary stainless steels such as 304 (0Cr18Ni9) and 316 (0Cr18Ni12Mo2Ti) also have limited applications in sulfuric acid media.
Therefore, pumps and valves for transporting sulfuric acid are usually made of high silicon cast iron (difficult to cast and process) and high alloy stainless steel (alloy 20). Fluoroplastics have good sulfuric acid resistance, and using a fluorine lined pump (F46) is a more economical choice.
2. Most metal materials are not resistant to hydrochloric acid corrosion (including various stainless steel materials), and molybdenum containing high silicon iron can only be used for hydrochloric acid below 50 ℃ and 30%.
Unlike metallic materials, the vast majority of non-metallic materials have good corrosion resistance to hydrochloric acid, so lined rubber pumps and plastic pumps (such as polypropylene, fluoroplastics, etc.) are the best choices for transporting hydrochloric acid.
3. Most metals are rapidly corroded and destroyed in nitric acid, and stainless steel is the most widely used nitric acid resistant material. It has good corrosion resistance to all concentrations of nitric acid at room temperature. It is worth mentioning that molybdenum containing stainless steel (such as 316, 316L) not only has inferior corrosion resistance to nitric acid compared to ordinary stainless steel (such as 304, 321), but sometimes even inferior.
For high-temperature nitric acid, titanium and titanium alloy materials are usually used.
4. Acetic acid is one of the most corrosive substances in organic acids. Ordinary steel will corrode severely in acetic acid of all concentrations and temperatures. Stainless steel is an excellent material resistant to acetic acid, and 316 stainless steel containing molybdenum can also be used for high temperatures and dilute acetic acid vapor. For high temperature and high concentration acetic acid or other corrosive media with strict requirements, high alloy stainless steel or fluoroplastic pumps can be selected.
5. Alkali (sodium hydroxide) steel is widely used in sodium hydroxide solutions below 80 ℃ and with a concentration of 30%. Many factories still use ordinary steel at temperatures below 100 ℃ and 75%. Although corrosion increases, the economy is good. The corrosion resistance of ordinary stainless steel to alkaline solution is not significantly better than that of cast iron, and it is not recommended to use stainless steel as long as a small amount of iron is allowed to be added to the medium.
For high-temperature alkaline solutions, titanium and titanium alloys or high alloy stainless steel are commonly used.
6. Ammonia (ammonia hydroxide) has minimal corrosion on most metals and non metals in liquid ammonia and ammonia water (ammonia hydroxide), except for copper and copper alloys which are not suitable for use.
7. Salt water (seawater) ordinary steel has a low corrosion rate in sodium chloride solution, seawater, and saltwater, and generally requires coating protection; Various types of stainless steel also have low uniform corrosion rates, but may cause localized corrosion due to chloride ions. 316 stainless steel is usually preferred.
8. Alcohols, ketones, esters, and ethers are commonly used as alcohol media, including methanol, ethanol, ethylene glycol, propanol, etc. Ketone media include acetone, butanone, etc. Ester media include various methyl esters, ethyl esters, etc. Ether media include methyl ether, ether, butyl ether, etc. They are generally non corrosive and can be applied to commonly used materials. When selecting, a reasonable choice should be made based on the properties and relevant requirements of the medium.

ADDRESS:No. 17 Yutan Street, Ganjingzi District, Dalian City, China
Mobile Phone:139-4261-1612
URL:www.dlzhby.com
